867175c5f7
- SKILL.md: full deployment guide covering prerequisites, config, build, flash, verification, OTA, and troubleshooting - deploy.sh: one-command build+flash script with auto port detection - validate.sh: pre-deploy checklist (ESP-IDF, secrets, hardware) Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
90 lines
2.4 KiB
Bash
Executable File
90 lines
2.4 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# MimiClaw Quick Deploy Script
|
|
# Usage: ./skills/deploy/scripts/deploy.sh [port]
|
|
#
|
|
# This script handles the full build-flash cycle:
|
|
# 1. Checks prerequisites
|
|
# 2. Ensures mimi_secrets.h exists
|
|
# 3. Builds the firmware
|
|
# 4. Auto-detects or uses specified serial port
|
|
# 5. Flashes and opens monitor
|
|
|
|
set -euo pipefail
|
|
|
|
RED='\033[0;31m'
|
|
GREEN='\033[0;32m'
|
|
YELLOW='\033[1;33m'
|
|
NC='\033[0m'
|
|
|
|
info() { echo -e "${GREEN}[+]${NC} $*"; }
|
|
warn() { echo -e "${YELLOW}[!]${NC} $*"; }
|
|
error() { echo -e "${RED}[x]${NC} $*"; exit 1; }
|
|
|
|
# Find project root (where this script lives: skills/deploy/scripts/)
|
|
SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
|
|
PROJECT_ROOT="$(cd "$SCRIPT_DIR/../../.." && pwd)"
|
|
cd "$PROJECT_ROOT"
|
|
|
|
info "MimiClaw Deploy — project: $PROJECT_ROOT"
|
|
|
|
# Check ESP-IDF
|
|
if ! command -v idf.py &>/dev/null; then
|
|
error "ESP-IDF not found. Source export.sh first:\n source \$IDF_PATH/export.sh"
|
|
fi
|
|
|
|
IDF_VER=$(idf.py --version 2>&1 | head -1)
|
|
info "ESP-IDF: $IDF_VER"
|
|
|
|
# Check secrets
|
|
if [ ! -f main/mimi_secrets.h ]; then
|
|
warn "main/mimi_secrets.h not found — creating from example"
|
|
cp main/mimi_secrets.h.example main/mimi_secrets.h
|
|
warn "Edit main/mimi_secrets.h with your credentials, then re-run this script"
|
|
exit 1
|
|
fi
|
|
|
|
# Check if secrets are configured (WiFi SSID not empty)
|
|
if grep -q 'MIMI_SECRET_WIFI_SSID.*""' main/mimi_secrets.h; then
|
|
error "WiFi SSID is empty in main/mimi_secrets.h — edit it first"
|
|
fi
|
|
|
|
# Build
|
|
info "Building firmware (fullclean)..."
|
|
idf.py fullclean >/dev/null 2>&1 || true
|
|
idf.py build 2>&1 | tail -5
|
|
|
|
if [ ! -f build/mimiclaw.bin ]; then
|
|
error "Build failed — check errors above"
|
|
fi
|
|
|
|
BIN_SIZE=$(stat -f%z build/mimiclaw.bin 2>/dev/null || stat -c%s build/mimiclaw.bin 2>/dev/null)
|
|
info "Firmware built: build/mimiclaw.bin ($(( BIN_SIZE / 1024 )) KB)"
|
|
|
|
# Detect serial port
|
|
PORT="${1:-}"
|
|
if [ -z "$PORT" ]; then
|
|
# Auto-detect
|
|
if [ "$(uname)" = "Darwin" ]; then
|
|
PORT=$(ls /dev/cu.usbmodem* 2>/dev/null | head -1)
|
|
else
|
|
PORT=$(ls /dev/ttyACM* /dev/ttyUSB* 2>/dev/null | head -1)
|
|
fi
|
|
fi
|
|
|
|
if [ -z "$PORT" ]; then
|
|
error "No serial port found. Plug in your ESP32-S3 or specify port:\n $0 /dev/cu.usbmodem1101"
|
|
fi
|
|
|
|
info "Serial port: $PORT"
|
|
|
|
# Flash
|
|
info "Flashing..."
|
|
idf.py -p "$PORT" flash 2>&1 | tail -10
|
|
|
|
info "Flash complete!"
|
|
echo ""
|
|
info "Opening serial monitor (Ctrl+] to exit)..."
|
|
echo ""
|
|
|
|
idf.py -p "$PORT" monitor
|