titor/mimiclaw
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
v1.1.0
mimiclaw/sdkconfig.defaults.esp32s3

42 lines
1.1 KiB
Plaintext
Raw Permalink Normal View History

feat: add sdkconfig defaults, partition table, and global config 16MB flash with custom partitions (2x2MB OTA + 12MB SPIFFS), PSRAM/WiFi/TLS tuning, and centralized compile-time constants. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 18:55:12 +08:00
# MimiClaw - ESP32-S3 Target Configuration
chore: add .gitignore and sdkconfig.defaults.esp32s3
2026-02-05 13:26:41 +08:00
CONFIG_IDF_TARGET="esp32s3"
feat: add sdkconfig defaults, partition table, and global config 16MB flash with custom partitions (2x2MB OTA + 12MB SPIFFS), PSRAM/WiFi/TLS tuning, and centralized compile-time constants. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 18:55:12 +08:00
# Flash 16MB + QIO
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
# CPU 240MHz
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
# PSRAM 8MB Octal
CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=2048
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=98304
CONFIG_SPIRAM_MEMTEST=n
# WiFi memory optimization
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=3
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=6
CONFIG_ESP_WIFI_RX_BA_WIN=3
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=16
# TLS optimization (PSRAM allocation + small buffers)
CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y
feat: add HTTP CONNECT proxy support for Telegram and Claude API Enable ESP32-S3 to reach api.telegram.org and api.anthropic.com through an HTTP CONNECT proxy (e.g. Clash Verge), required in regions where these services are blocked. - New proxy module (http_proxy.c/h): CONNECT tunnel + TLS via esp_tls with pre-connected socket injection (esp_tls_set_conn_sockfd) - Telegram and LLM modules split into direct/proxy paths - CLI commands: set_proxy <host> <port>, clear_proxy - Proxy config persisted in NVS - Fix TLS buffer: MBEDTLS_SSL_IN_CONTENT_LEN 4096 → 16384 - Increase task stacks for TLS overhead (poll 12KB, agent 12KB, outbound 8KB) - Default model changed to claude-opus-4-6 - Capture raw error body for non-200 API responses Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-06 22:40:28 +08:00
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
feat: add sdkconfig defaults, partition table, and global config 16MB flash with custom partitions (2x2MB OTA + 12MB SPIFFS), PSRAM/WiFi/TLS tuning, and centralized compile-time constants. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 18:55:12 +08:00
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# WebSocket support
CONFIG_HTTPD_WS_SUPPORT=y
# Custom partition table
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
feat: include spiffs.bin in release and switch console to USB-JTAG Add spiffs.bin to CI release artifacts and merged firmware image. Switch primary console from UART to USB-Serial-JTAG so web serial monitor can interact with the device directly over USB.
2026-03-16 11:00:00 +08:00
# Console: USB Serial/JTAG primary (supports both input and output via USB)
# ESP-IDF v5.5+ has TX timeout protection (50ms) so device won't hang
# when no USB host is connected.
CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y
Reference in New Issue Copy Permalink